HOMEOWNERS
Products
Applications
FAQs
Store Finder
Spreader Settings







DEALERS
POP Materials
Artwork
Advertising
News
Material Safety Data Sheet
Find a Distributor
Join Dealer List










PROFESSIONAL
Products
Uses
Research
Log Book
Material Safety Data Sheet
Find a Distributor
Spreader Settings










GARDEN WRITERS
Register
News
Artwork
Research
Information Sheets
Regulations
FAQs










HOMEOWNERS
STORE FINDER
DEALERS
PROFESSIONAL
GARDEN WRITERS
visit Melinda Myers' web site

Uses


Turf Establishment

Rate Chart for Using Milorganite to Seed, Sod, or Sprig

Milorganite lbs. per 1,000 sq. ft.
Soil Type Seeding and Sodding Sprigging
Sand 50-100 50-100
Native Soil 25-50 25-50

Milorganite Seed Mixing Chart

Seed Type Milorganite (lbs.) Seed (lbs.) Seed per 1000 sq. ft. (lbs.) Coverage Area of Mix (sq. ft.) Milorganite per 1000 sq. ft. (lbs.)
Bentgrass 20 5 1 5,000 4
Bermuda Grass 20 5 1 5,000 4
Blue Grass 100 25 4 6,250 16
Blue-Rye Mix 100 25 6 4,250 23
Rye Grass 100 25 8 3,250 30

Mixing grass seed with Milorganite makes it easier to accurately spread seed. The standard Milorganite-to-seed is 4 to 1 by weight. When mixing seed and Milorganite, make sure you decrease the rate of other Milorganite applied to avoid over-fertilization.

Seeding

Spread seed or Milorganite – seed mix evenly on the prepared soil. Gently work the seed into the soil 1/16 to 1/8 inch. On light (sandy) soils, watering alone may be adequate for seed incorporation. Cover with a thin layer of weed seed free mulch to help conserve moisture.

Watering

Keep the seeded area moist until seed emerges. Frequent, light watering is necessary at this time. After seedlings are ½ to 1 inch tall and climatic conditions allow, reduce watering to several times per week at depth of one to two inches. Keep the root zone moist. Decrease frequency and increase depth of watering as seedlings mature.

Mowing

Mow the new turf as you would mature turf. Keep your mower blades sharp. Mow only when turf is dry. Remove a maximum of 1/3 leaf at any one time. Because new turf contains a high amount of water, collect clippings to prevent smothering new turf.

Dormant Feeding

Superintendents use every tool available to them to have courses ready for play as soon as snow cover leaves. Applying Milorganite in very late fall or just prior to a winter snow cover is part of this program.

The University of Wisconsin conducted a two-year study to evaluate dormant feeding on bentgrass greens. Color response was measured. It was found that microbial activity occurred during winter months. This released a small amount of nitrogen. This nitrogen was then available to the bentgrass as soon as snow melted.

Bentgrass color was recorded every seven to ten days after snowmelt. Measurements continued until mid-May. Dormant applications of Milorganite significantly improved bentgrass color, ranging from 0.4 to 1.4 units. This increase in quality was noted on both well- and poorly-drained greens.

Additional benefits of a dormant Milorganite application include:
  • earlier recovery from winter injury
  • aids in recovery from snow mold damage
  • turf damage repair from early season play
Taken from: Factors Affecting Spring Color Response of Creeping Bentgrass to Dormant Applications of Milorganite, Kussow, 1995-1996

Greens

Cool Season Turf 1,4
  N per 1,000 sq. ft. Milorganite 6-2-0 per 1,000 sq. ft.
Spring 1 lb. 17 lbs.
Summer ½ lb. 6 - 8½ lbs.
Fall 1 lb. 17 lbs.
Dormant 1½ lbs. 25 lbs.

Warm Season Turf 2,4
  N per 1,000 sq. ft. Milorganite 6-2-0 per 1,000 sq. ft.
Spring 1 - 2 lbs. 17 - 34 lbs.
Summer 1 - 2 lbs. 17 - 34 lbs.
Fall 1 - 2 lbs. 17 - 34 lbs.
Fall over-seeding 3 1 lb. 17 lbs.
1 Cool Season Turf Bentgrass and poa annua.
2 Warm Season Turf Bermuda, seashore paspalum and zoysiagrass
3 In regions where killing frosts can be expected, avoid nitrogen applications to warm-season grasses in the fall less than one month prior to the average date of the first killing frost. For best results, fertilize when over-seeding with cool-season grasses.
4 All rates monthly except dormant which is annual.

Tees

Cool Season Turf 1, 4
  N per 1,000 sq. ft. Milorganite 6-2-0 per 1,000 sq. ft.
Spring ½ lb. 8½ lbs.
Summer ½ lb. 8½ lbs.
Fall 1 lb. 17 lbs.
Dormant 1½ lbs. 25 lbs.

Warm Season Turf 2, 4
  N per 1,000 sq. ft. Milorganite 6-2-0 per 1,000 sq. ft.
Spring 1 - 2 lbs. 17 - 34 lbs.
Summer 1 - 2 lbs. 17 - 34 lbs.
Fall 1 - 2 lbs. 17 - 34 lbs.
Fall over-seeding 3 1 - 2 lbs. 17 lbs.

1 Cool Season Turf Bentgrass, poa annua, Kentucky bluegrass, fescue and perennial ryegrass
2 Warm Season Turf Bermuda, seashore paspalum and zoysiagrass
3 In regions where killing frosts can be expected, avoid nitrogen applications to warm-season grasses in the fall less than one month prior to the average date of the first killing frost. For best results, fertilize when over-seeding with cool-season grasses.
4 All rates monthly except dormant which is annual.

Fairways

Cool Season Turf 1, 4
  N per 1,000 sq. ft. Milorganite 6-2-0 per 1,000 sq. ft.
Spring 1 lb. 17 lbs.
Summer ½ lb. 8½ lbs.
Fall 1 lb. 17 lbs.
Dormant 1½ lbs. 25 lbs.

Warm Season Turf 2, 4
  N per 1,000 sq. ft. Milorganite 6-2-0 per 1,000 sq. ft.
Spring 1 - 2 lbs. 17 - 34 lbs.
Summer ½ - 1 lb. monthly 8 - 17 lbs. monthly
Fall 1 lb. 17 lbs.
Fall over-seeding 3 ½ - 1 lb. 8 - 17 lbs.

1 Cool Season Turf Bentgrass, poa annua, Kentucky bluegrass, fescue and perennial ryegrass
2 Warm Season Turf Bermuda, seashore paspalum and zoysiagrass
3 In regions where killing frosts can be expected, avoid nitrogen applications to warm-season grasses in the fall less than one month prior to the average date of the first killing frost. For best results, fertilize when over-seeding with cool-season grasses.
4 All rates monthly except dormant which is annual.

Roughs

Cool Season Turf 1, 4
  N per 1,000 sq. ft. Milorganite 6-2-0 per 1,000 sq. ft.
Spring ½ - 1 lb. 8 - 17 lbs.
Summer No Summer Applications
Fall ½ - 1 lb. 8 - 17 lbs.
Dormant 1½ lbs. 25 lbs.

Warm Season Turf 2, 4
  N per 1,000 sq. ft. Milorganite 6-2-0 per 1,000 sq. ft.
Spring 1 lb. 17 lbs.
Summer 1 lb. 17 lbs.
Fall 1 lb. 17 lbs.

1 Cool Season Turf Bentgrass, poa annua, Kentucky bluegrass, fescue and perennial ryegrass
2 Warm Season Turf Bermuda, seashore paspalum and zoysiagrass
3 In regions where killing frosts can be expected, avoid nitrogen applications to warm-season grasses in the fall less than one month prior to the average date of the first killing frost. For best results, fertilize when over-seeding with cool-season grasses.
4 All rates monthly except dormant which is annual.

Athletic fields

Milorganite has long been an integral part of sports field maintenance, including the preparation for many Super Bowls. Milorganite promotes dense turf, which increases footing and fall protection. Milorganite's high amount of slow release nitrogen encourages deep rooting for durability and stress resistance.

Cool Season Turf 1, 4, 5
  N per 1,000 sq. ft. Milorganite 6-2-0 per 1,000 sq. ft.
Spring 1 lb. 17 lbs.
Summer ½ - 1 lb. 8½ - 12 lbs.
Fall 1 lb. 17 lbs.
Dormant 1½ lbs. 25 lbs.

Warm Season Turf 2, 4, 5
  N per 1,000 sq. ft. Milorganite 6-2-0 per 1,000 sq. ft.
Spring 1 - 2 lbs. 17 - 34 lbs.
Summer ½ - 1 lb. monthly 8 - 17 lbs. monthly
Fall 1 - 2 lbs. 17 - 34 lbs.
Fall over-seeding 3 1 - 2 lbs. 17 - 34 lbs.

1 Cool Season Turf Bentgrass, poa annua, Kentucky bluegrass, fescue and perennial ryegrass
2 Warm Season Turf Bermuda and zoysiagrass
3 In regions where killing frosts can be expected, avoid nitrogen applications to warm-season grasses in the fall less than one month prior to the average date of the first killing frost. For best results, fertilize when over-seeding with cool-season grasses.
4 All rates monthly except dormant which is annual.
5 Summer applications are monthly. All others are annual.

Spoon Feeding

Using Milorganite Greens Grade 6-2-0 helps level peaks and valleys because its nitrogen releases slowly over time, without excessive amounts being available quickly after application. Because you are applying small amounts of nitrogen, using a low analysis fertilizer helps eliminate streaking.

Milorganite contains 6% nitrogen. This means that to apply 0.33 lbs. nitrogen per 1000 square feet in a spoon feeding program, you need to apply 5 ½ lbs. Milorganite per 1000 square feet. This is easier to spread evenly than the 1 1/3 lbs. of a 27% nitrogen granular fertilizer needed over that same area.

Spoon feeding with Milorganite offers other advantages:
  • Frequent light applications provide a constant energy source for soil microbial activity
  • Provides a constant source of organically-complexed iron for deep green color throughout the season
  • Benefits of faster, easier and affordable applications
    • one spoon feeding application can be accomplished by one employee in about the same time it takes to change cups
    • 100,000 square feet of greens will require less than ten bags at an application rate of 0.35 pounds of nitrogen per 1,000 sq. ft.

Lawn Care

Milorganite is the ideal choice for lawn fertilizer programs that use organic nitrogen as their base. Milorganite® 6-2-0 will not burn turf. It will not cause “leggy” ornamental plants if it accidentally is applied to them. Produced and sold since 1926, Milorganite delivers the results customers demand.

Cool Season Turf 1
  N per 1,000 sq. ft. Milorganite 6-2-0 per 1,000 sq. ft.
Spring 1 lb. 17 lbs.
Summer 4 ½ lb. 8½ lbs.
Fall 1 lb. 17 lbs.
Dormant 1½ lbs. 25 lbs.

Warm Season Turf 2, 3
  N per 1,000 sq. ft. Milorganite 6-2-0 per 1,000 sq. ft.
Spring 4 1 lb. 17 lbs.
Summer 4 1 lb. 17 lbs.
Fall 1 lb. 17 lbs.
Fall over-seeding 3 1 lb. 17 lbs.

1 Cool Season Turf Bentgrass, poa annua, Kentucky bluegrass, fescue and perennial ryegrass
2 Warm Season Turf Bermuda grass, Bahia grass, zoysiagrass, centipede grass and St. Augustine grass. Annual totals may be adjusted for grass variety and location, based on the Florida Turf Recommendation Chart, IFAS Fact Sheet SL-21.
3 In regions where killing frosts can be expected, avoid nitrogen applications to warm-season grasses in the fall less than one month prior to the average date of the first killing frost. For best results, fertilize when over-seeding with cool-season grasses.
4 Monthly applications.

Milorganite   ~   260 W. Seeboth Street, Milwaukee, WI 53204   ~   (800) 304-6204

info@milorganite.com

©2010 Milorganite All Rights Reserved.